AD-net Technology AN-TDM-IP-1E1/2E1-A Manual de usuario descargar pdf (Pagina 9)

TDM over IP User Manual V1.2

- 8 -

7.2 Cable connecting

7.2.1 power source connecting

Make sure the power switch is off, then plug into the AC 220V power jack,

or connect the DC power to the junction pole. Pay attention to the polarity.

Make sure they are well connected.

7.2.2 LAN connecting

According to the requirement, prepare a RJ-45 crossing or straight UTP

cable, connect one end to the UPLINK port in the back panel of the equipment.

Connect the other end to PC or LAN switch. If power on and well connected,

the LINK LED will be lighted.

7.2.3 E1 connecting

IPCE provides standard BNC co-axial cable interface. Use two coaxial

cables and connect IPCE to the terminal equipment (PBX).

7.3 Function testing

z Push the power switch ON

z Observe the alarming indicator on the panel

If the entire thing is normal working, the E1 alarming indicator LOS on the

front panel will be OFF, and indicator PWR, LINK will be ON.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Sin comentarios

AD-net Technology AN-TDM-IP-1E1/2E1-A Manual de usuario Pagina 9