AD-net Technology AN-TDM-IP-1E1/2E1-A Manual de usuario descargar pdf (Pagina 16)

TDM over IP User Manual V1.2

- 15 -

the configuration information.

On the other hand, 5 in the menu, according to the state the equipment is

in, has different function, and has different illustration as well. If IP circuit

emulation has been started, the illustration will be “5-STOP IP Circuit

Simulator”. Input 4 now, IP circuit emulation will be stopped. If IP circuit

emulation is in the stop state, the illustration will be “4-START IP Circuit

Simulator”. Input 4 now, IP circuit emulation will be started.

Note: when starting the equipment, if all the configuration items are well

configured, then IP circuit emulation will start automatically. Or the

configuration interface will appear to allow the operators configure themselves.

Other than serial port configuration, we can also use telnet to configure the

remote terminal. The user interface is the same. The user’s name of telnet is

“farboat”, the password is “farboat2003”. We must remember that only after all

the configurations are well configured, the system can work well.

A well configured system must include 3 items:

1) the IP address is well configured. It includes subnet mask and net gate.

Testing method: after the both ends are right configured, they can ping

each other.

2) Right configure the IP address of the peer terminal. This is right the item

“Peer ip address:” in the basic configuration.

3) The advanced configuration items in either the local system or remote

system are completely the same.

8.2 Trouble shooting

After being started, it appears “NETWORK ERROR PLEASE CHECK NETWORK

CABLE!”

Failure cause: network is obstructed.

Solution: check if the net wire is well plugged. If the local net wire has been

well plugged, make sure the peer terminal net wire is well plugged. If net wire

in both terminals has been well plugged, ask the network administrators for

help.

1 2 ... 11 12 13 14 15 16 17

Sin comentarios

AD-net Technology AN-TDM-IP-1E1/2E1-A Manual de usuario Pagina 16